U203-E Display

U203-E Display

This device is mainly applied in the system of dispenser to remove the solid sedimentation is the oil ,ensuring the cleaning of the oil or like ,and as a result to extend the life span and accuracy of the flow meter. In the system of dispenser ,it is fixed between the oil pump and the flow meter.

Materials:

Body: Body: Aluminum (Spray-Painted)

Seals: Buna-N

Technical Specifications:

Working pressure:0.2Mpa

Filter accuracy:30um

Flow Rate:65L/min

Rating Medium:Gasoline,Kerosene, Diesel

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight Dimension

U103-A 2kg/case of1 2.2kg/case of1 20x13x14cm/case of1

oil, so as to reduce the volume of drained oil. Turn adjusting bolt clockwise to reduce discharge, anticlockwise to increase discharge. Therefore, changing the position of bolt enable discharge approach academic volume and reach the requirements on measurement transducer of national appraisal regulations. As two regulative bolts access to adjusting piston, the adjusting discharge in a circulation per bolt can be calculated in the following formula: △V = 1/2πd12 nt (2--4 ) △V ── adjusting value in per circulation; D1 ── diameter of regulative piston; n ── turn fuel dispenser ing number of adjusting bolt; t ── screw- pitch of adjusting bolt. There is another metal piston measurement transducer in current market. See the Diagram 2-19. Regulative piston is singularly installed in piston rather than connect with rod in this model. Its adjusting value in terms of per adjusting bolt is: △V = 1/4πd2 nt (2--5 ) fuel dispenser Common failure and Troubleshooting Metal piston measurement transducer has the two common failures --- accuracy decline and mechanical trouble. Measure accuracy beyond scope The allowed measurement accuracy of fuel dispenser is ±0.3 %, repeated tolerance no more than 0.15 % according to the stipulation of JJG443-98 Fuel dispenser. The maximum allowed tolerance of min. measured valve don’t exceed ±0.5 %，its repeated tolerance no more than 0.25 %. The ratio of maximum flow (Q max.) to minimum flow (Q min.) is 10 to 1. as fuel dispenser leave factory. The ratio should not be less than 5: 1 in inspecting at operation locale. All of exceeded tolerance is regarded as beyond measurement accuracy. There are many elements and reasons resulting in measurement accuracy beyond scope, including unstable hydraulic system (extensive pressure fluctuation), electric system failure, thick colloid in frictional interface, measurement transducer abrasion, etc. The last two reasons will mainly be introduced in this article. Regulating adjusting fuel dispenser

€€ã€€ 6 Bcd2 R(4) M　　 CHSUTT_Acquirer　　 To interrogate the Acquirer of the card. Note this field is only applicable in　　 case of DEVICE CARD TYPE totals.　　 11 RcTotal R(4) M　　 CHSUTT_Purchase　　 To interrogate the total number of purchase transactions and the total　　 purchase amount.　　 12 fuel dispenser RcTotal R(4) M　　 CHSUTT_Refund　　 To interrogate the total number of refund transactions and the total refund　　 amount.　　 13 RcTotal R(4) fuel dispenser M　　 CHSUTT_CashAdvance　　 To interrogate the total number of cash advance transactions and the total　　 cash advance amount.　　 14 RcTotal R(4) M　　 CHSUTT_Cancellation　　 To interrogate the total number of cancellations and the total cancellation　　 amount.　　 22 RcTotal R(4) M　　 CHSUTT_Loyalty　　 To interrogate the total number of loyalty transactions and the total amount.　　 27 RcTotal R(4) M　　 CHSUTT_Fee　　 To interrogate the total number of transactions and the total fee amount.　　 28 fuel dispenser

lans. To stop the clouds building, she must get through some reforms worthy of the name, notably in health care. A shift in the political climate in Germany was perhaps to be expected. Thanks to more competition and a new generation of journalists, the media are now more aggressive than they used to be. What is more, those who supported Ms Merkel and her more radical reform ideas before last year s elections are starting to show their disappointment. Germany s leading weekly, Der Spiegel, now frequently lays into the government for its failings. Albeit mostly in private, business leaders are fuel dispenser starting to complain that they do not understand what is going on. Some Christian Democratic politicians, especially state premiers, are publicly wondering whether the coalition is really worth the hassle. Economists are calling for faster reforms. Even Horst Köhler, the federal president, who owes his own job to Ms Merkel, has become cautiously critical of her g fuel dispenser overnment. Two-thirds of Germans are said to be unhappy with the government s performance, even though a similar proportion still think that Ms Merkel herself is doing a good job. Is the grand coalition getting stuck before it has really got started? To find the answer, it helps to keep in mind the government s original programme. In its first few months, it did not want to move too quickly. Its priority was to create calm after last year s political turmoil, to avoid bickering and to make time for repairing the public finances. Measured against these aims, the results are modest but reasonable—although more spending cuts would have been better than sticking to the decision to raise taxes. Only in recent weeks has the coalition begun to discuss harder reforms. Besides health care, these include corporate-tax reductions and more labour-market reforms. In none of these will it be easy to find a compromise that is any better than the lowest common denominator. In health care, for instance, Christian Democrats want to start decoupling contrib fuel dispenser